Fitted wardrobes
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Made-to-measure wardrobes and walk-in wardrobes · València
Looking for made-to-measure wardrobes in Algirós? You can plan the design from home in the configurator, send it to us and then arrange a measuring visit at your home. We cover this district of Valencia, including L'Illa Perduda, Ciutat Jardí, L'Amistat, La Bega Baixa and La Carrasca. The result is a wardrobe designed for your wall and for the clothes and belongings you actually need to store, not a catalogue unit forced to fit.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
01 — Solutions in Algirós
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Complete wardrobes with doors that need no room to open. With mirror, glass or other finishes.
Ideal if the bed is close by or you have less than 1 m clear in front.
Open or closed, straight, L-shaped or U-shaped. Laid out around what you store, not around a standard module.
Ideal from around 1.5 m wide.
02 — In Algirós
Picture a flat in L'Amistat with a rectangular bedroom, a door next to one corner and a window on the opposite wall. Right now the wardrobe is a freestanding piece that leaves a corner beside it where boxes pile up. Before getting in touch, count how many long and short hanging items you have and what takes up the most room: seasonal clothes, shoes or bedding. With that in hand, open the configurator, draw the room and see whether a straight front or an L-shaped one that makes use of the angle works better. You send the design and receive a proposal. During the visit we check whether the corner is square, which is rare, because a wall that is out of plumb changes how the doors are cut. If you live in La Carrasca or Ciutat Jardí, the approach is the same as anywhere else in Valencia. What changes is the space available: in a large room there is space for a long front with two hanging zones; in a small one, a tall unit with drawers below and a top cupboard for suitcases. The design adapts to your reality, not the other way round.
Tell us about your space
In a home with several bedrooms, each room calls for something different. If you share a flat, the practical option is one wardrobe per bedroom with its own door and set of drawers, so nobody has to depend on the person down the corridor. It helps if each unit has similar dimensions, so the home looks consistent.
If you are a tenant, ask the landlord first what work is allowed. A freestanding wardrobe, which stands against the wall without being fixed to it, is a straightforward option when a built-in is not possible, and it can go with you if you move. If you are a landlord renting out rooms in L'Illa Perduda or La Bega Baixa, a hard-wearing, easy-to-clean finish pays off with use.

If your home has a sloping ceiling or a loft room, a standard wardrobe almost never fits: it loses the upper part or leaves a useless gap under the slope. A made-to-measure wardrobe can be drawn with the diagonal cut, so the low zone, where a hanging rail will not fit, is used for drawers or shelves, and the tall zone for long garments.
For example, in a penthouse in Ciutat Jardí or L'Amistat you could combine a low front with hinged doors in the lowest zone and a tall unit on the higher side. In this case the measuring is decisive: the height is taken every twenty or thirty centimetres. More ideas in wardrobes for loft rooms.
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
If your home has a terrace or an enclosed utility balcony, that is probably where you keep the mop, the clothes airer, the toolbox or the cleaning products. A narrow, shallow wardrobe with plain doors tidies all of that away and leaves the area clear. Damp has to be considered: boards and fittings suited to the use are chosen, and the unit is not placed hard against an unventilated wall.
It is a very specific solution, and it requires careful measuring around services such as the water meter cupboard or the washing machine drain. In La Carrasca or La Bega Baixa you can request it as a separate project or add it to the bedroom wardrobe. See wardrobes and storage for variations.
You don't need a whole room to have a walk-in wardrobe. A medium-sized bedroom can give up an area, for example one side of the bed or the space beside the window, and turn it into an L-shaped or U-shaped walk-in wardrobe with hanging rails at two heights. The key is to leave a walkway of around eighty centimetres so you can move around comfortably. If width is short, a single front with rails at two heights and a pull-out shoe rack does almost the same job.
If you have a spare room you no longer use in L'Illa Perduda or L'Amistat, another option is to turn it into a walk-in wardrobe and free up the bedroom. It is assessed using a plan and photographs, and you can see examples in small walk-in wardrobes.
As a general possibility, an older building and a recently built home raise different questions. An older house may have walls with slight irregularities, tall skirting boards and door frames that are not standard. In a recent renovation, the walls are usually straighter and there are new services to work around.
Whatever your situation in Algirós, the measuring visit checks it: plumb, floor level, actual height and the position of sockets and outlets. The design tolerances are calculated from that data, which prevents a door catching on the skirting board or the ceiling stopping a top cupboard from opening.

The door front is what you see every day, so it is worth choosing it carefully. Plain colours bring light to a small bedroom, wood finishes warm up a cold room and a mirror visually enlarges the space. If you want something discreet, a front without handles, opened by push-to-open or a recessed edge, keeps the wall looking clean.
Some clients choose plain colours, others wood grain and others framed doors. You can look through the options in wardrobe doors and bring a reference photo to the visit. If your flat in Ciutat Jardí or La Carrasca has doors and floors in a particular colour, it is best to choose the doors with those samples in view.
You start with the wardrobe configurator, the quote form or a WhatsApp message with photos. You receive an initial proposal and we agree the visit. If you don't order the wardrobe afterwards, the visit costs €50; if you do order it, there is no charge. Once the measurements are taken, the final quote is drawn up, and that is the document you refer to when deciding.
When you pay the deposit, the wardrobe is made and the installation is scheduled for the date that suits you best. Manufacturing usually takes two to three weeks and is adjusted to your home's timetable. The whole process is explained in how we work, and if your home is on the edge of the district you can also look at Benimaclet or Camins al Grau.
Quote
With your name, a phone number and a photo of the space, we can get started.
What happens next
Frequently asked questions
Yes, we cover the whole district of Valencia: L'Illa Perduda, Ciutat Jardí, L'Amistat, La Bega Baixa and La Carrasca. When you send your request, tell us your neighbourhood and we will arrange the measuring visit.
Yes, as long as the landlord allows it. A freestanding wardrobe needs no building work and can go with you to another home, and a built-in one is considered with the owner's prior permission.
Yes. A corner unit or an L-shaped front turns an unused corner into hanging space and shelves. During the visit the angle is measured so the cut list can be adjusted.
It is drawn with the cut of the slope and each zone is assigned a use: drawers in the low part, long garments where there is height. For that, several heights are taken during the visit.
We arrange the visit around your schedule, and after the deposit manufacturing usually takes two to three weeks. The exact timeframe is confirmed with the final quote.
Tell us what you need to store, send us a few photos or open the configurator and design your own proposal. We'll come back to you with a solution designed around your room.