Made-to-measure corner wardrobes in Valencia

Made-to-measure corner wardrobes in Valencia turn a tricky corner into useful storage: two walls meeting at a ninety-degree angle, with a deep recess that almost always goes to waste. A well-planned corner wardrobe avoids the unreachable back and arranges the doors so that both wings open without getting in each other's way. Here is what shapes it can take and what information we need to design it.

Shape your next wardrobe.

Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.

Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.

Why the corner is the hardest spot in a room

Plan · example Floor plan · corner wardrobe
2,60 m 2,10 m 123
1Corner module put to good use 2Doors that don't get in each other's way 3Two fronts with a matching finish

In a corner two walls converge and, with them, the problem of depth: a unit pushed into the angle ends up so deep that you can't reach the clothes at the back. It's where forgotten boxes pile up.

A corner wardrobe solves this in three ways: with an L-shaped unit, with two wings that meet at an angle, or with a diagonal unit that cuts off the corner. Each layout changes the capacity, the cost and how easy it is to reach things. Before you choose, we draw all three options on your measurements so you can see how much usable space each one gains.

01

The L-shaped wardrobe and the corner unit

The classic L is formed from two straight runs that join at the corner. One run takes the full depth and the other is shortened to leave room for the doors. At the join there is a corner unit, which can be put to good use with quarter-circle shelves, rotating shelves or a deeper hanging area.

That join is the delicate point. If it's handled badly, the doors of the two wings collide when they open. If it's handled well, the corner unit becomes the most spacious part of the whole wardrobe, with room for suitcases, blankets or out-of-season clothes.

Made-to-measure corner wardrobe with white doors and oak handles in a bright bedroom in Valencia
02

When a diagonally cut corner makes sense

A diagonal corner replaces the right angle with a door set at forty-five degrees. It improves reach, because you get into the interior from the front, but it loses a little volume at the ends. It's the solution that suits bedrooms best where the wardrobe is seen from the bed and you want a front with a gentle bend.

Another advantage of the diagonal is that it eases the flow of traffic in corners you pass often. If a room door is near the corner, reducing the projection avoids knocks from the door handle. We study it case by case using the floor plan.

Have you already measured the space?

Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.

03

Doors in the corner: how to keep them from getting in each other's way

  • 01

    Two leaves opening towards the same corner can jam. That's why the corner unit almost always has a fixed leaf or a fan-style opening, designed so that the first door unfolds completely before the second starts to move.

  • 02

    With sliding doors, the corner is solved by changing the plane of each wing: one has its track at the front and the other at the back. With hinged doors, we calculate the swing radii so that none of them cross. And with bifold doors, the stack of leaves is placed away from the corner. We draw it all out before manufacturing, with every door in the open position, so you can check that the way to the corner stays clear and that no handle gets trapped against the adjoining wall.

04

Making the most of the hidden depth of the corner

The depth at the corner can be a trap or a treasure. With fixed shelves it's hard to reach; with rotating or pull-out shelves, you get almost all of it back. Corner trays that slide on a runner bring the contents towards you.

For hanging, the best idea is usually to reserve the corner for long rails of coats and dresses, and put shorter clothes in the wings, where you can see them head-on. That way the corner doesn't fill up with things you never use, and the corner wardrobe stops being a dumping ground. Keeping the corner for things you rarely use, such as blankets or suitcases, and the wings for everyday items, is the arrangement that works best.

05

Measuring up a corner: what you can't see on the plan

The corners in homes are almost never exactly square. An angle of eighty-eight or ninety-two degrees changes how the unit fits and means adjusting the edges with a compensation profile. That's why we measure the angle, the length of both walls, the height at three points and the position of sockets, radiators and skirting boards.

Also note whether there is a beam, a column or a fuse box in the corner. If the wall has a projection, we design a recess to go around it. With these measurements the corner unit fits first time and needs no adjustments.

White and oak made-to-measure corner wardrobe with an open door showing a rail, drawers and baskets in a bright bedroom in Valencia
Measuring visit

Request a measuring visit in Valencia

  • 01You leave us your name and your area.
  • 02We message you on WhatsApp to agree a day.
  • 03The measuring visit costs €50 and is free if you place an order.
06

Corners with a window, radiator or door nearby

Sometimes the corner isn't clear: a window cuts the wall at mid-height, a radiator takes up the skirting zone or the room door opens right beside it. In those cases the corner wardrobe can't cover the whole angle and is stepped: a low run under the window, a tall one along the rest of the wall.

If the radiator ends up inside the corner, we leave a grille in the front and insulate the interior so the heat doesn't damage the clothes. And if the entrance door opens against the corner, the first unit is set back. Every obstacle is noted on the sketch before the dimensions of the pieces are fixed.

07

Typical corners in bedrooms and hallways in Valencia

  • 01

    The corner wardrobe works well in bedrooms with the bed on one wall and the wardrobe taking up the other two, in through-rooms with a dead corner, and in hallways with a turn. It's also used in studies where one side acts as a wardrobe and the other as a work area.

  • 02

    In each case the priority changes. In a bedroom, everyday clothes matter most; in a through-room, keeping boxes and suitcases tidy; in a study, having one wing with shelves and the other with a desk. With a photo of the corner we can tell you which layout fits.

08

How to request your corner wardrobe

Send us the measurements of both walls, the height, the angle if you know it, and a photograph of the corner. Tell us what you store and which of the wings you'll use most. If the corner has a window, a radiator or a door very close by, mark it on the photo; those details decide where each run starts and how far the unit can project.

With that, you can prepare the design in the configurator and send it in for a quote. We work in Valencia and its province. The measuring visit costs €50 if you end up not ordering the wardrobe, and there is no charge if you do; the average manufacturing time is two to three weeks from the deposit.

Enquiry

Tell us about your project in Valencia

  1. 1We read your message and look at your photos.
  2. 2We reply on WhatsApp with a first figure.
  3. 3We measure up and prepare the final quote. The measuring visit costs €50 if you don't go ahead with the order and is free if you do.

We don't cut a single board until you've approved the design and the price.

Your fitted wardrobe

2 MIN

We'll prepare a WhatsApp message for you. You can review it before sending and attach your photos directly in the chat.

Questions

Frequently asked questions about wardrobes in Valencia

After installation: warranty and care for your wardrobe.

Does a corner wardrobe have more capacity than a straight one?

It uses an area that is normally lost, so it gains capacity compared with leaving the corner empty. Compared with a straight wardrobe of the same floor area, it depends on the corner unit chosen.

How do you reach the back of the corner?

With rotating shelves, pull-out trays or a diagonal unit. It's chosen according to what you store: small items are retrieved with trays and long garments with deep rails.

Which doors work best on a corner wardrobe?

Hinged doors with a fixed leaf next to the corner work well; sliding doors require two different planes. It all depends on the space in front of each wing.

Can you make a corner wardrobe with an angle other than ninety degrees?

Yes, we measure the real angle and make the pieces to measure. The edges are adjusted with compensation profiles.

Can a corner wardrobe include a desk area or shoe storage?

Yes. One wing can combine shelves with a shelf that serves as a desk, or reserve the lower part for a shoe rack. We define it when we draw each run.

Shall we talk about your project?

Send us a photo of the space and some approximate measurements on WhatsApp: we'll give you some initial guidance and arrange the measuring visit.

Your satisfaction is our priority We listen to your ideas and go through the measurements, finishes and every detail of the project with you.
WhatsAppQuote