Fitted wardrobes
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Made-to-measure wardrobes and walk-in wardrobes · València
If you are looking for made-to-measure wardrobes in Ciutat Vella, this page explains how an order works, from La Seu to Sant Francesc. You start with a design made at home, then we measure up in your home and you receive a quote with real figures. It works just as well for a fitted wardrobe in a small bedroom as for a walk-in wardrobe in a large room in El Carme, La Xerea, El Pilar or El Mercat.
Try out the measurements, plan the interior layout and choose your finishes. See your idea take shape and share it with us so we can prepare your quote.
Send us your configuration with your measurements and we'll give you a guide price within 24 hours, free of charge. The measuring visit at your home comes afterwards.
01 — Solutions in Ciutat Vella
For gaps between walls, alcoves and corners. Floor to ceiling and a precise fit, even when the walls aren't square.
Ideal for alcoves, ends of corridors and older built-in cupboards.
Complete wardrobes with doors that need no room to open. With mirror, glass or other finishes.
Ideal if the bed is close by or you have less than 1 m clear in front.
Open or closed, straight, L-shaped or U-shaped. Laid out around what you store, not around a standard module.
Ideal from around 1.5 m wide.
02 — In Ciutat Vella
Imagine you live in a flat in El Carme with a three-by-three-metre bedroom and a wall that currently holds a chest of drawers, with a loose coat hook behind the door. Before you start, make a list of what you want to store: coats, shirts, drawers for underwear, suitcases and the odd box of seasonal clothes. Then measure the width of the wall at three heights, because in an older building it can vary by a few centimetres from top to bottom. With those figures, go into the configurator, draw the wall and try out whether two modules with sliding doors will fit or whether hinged fronts would suit better. You send the design and, when we arrange the visit, we check the plumb of the wall, the real height to the ceiling and the swing of your bedroom door in your home. The same goes if your home is in La Xerea, La Seu or El Pilar: you draw the starting design and the measuring visit adjusts it to the wall as it really is.
If you are happy with the result, the next step is to decide what stays and what gets replaced: a rail you already have, a nearby headboard or a chest of drawers that can stay. Note it down before the visit so the design takes it into account from the start and doesn't have to be redone later.
Tell us about your space
In an older home, the floor may have a slight slope or a wall may drift a few millimetres towards the top. A made-to-measure wardrobe is built precisely to absorb those differences, with adjustable plinths and side panels that are scribed to the partition wall.
That is why the measuring visit takes several measurements rather than just one. We measure the width at the top, in the middle and at the bottom, the height at the edges, and the exact point where the skirting board ends. If you have an exposed beam or a ceiling with a moulding, tell us when you write, because it affects how high the wardrobe can go. With those figures, the Ciutat Vella proposal is written around what is actually there, not around a catalogue size.

When the flat is on an upper floor without a lift, it pays to think about delivery from the outset. A made-to-measure wardrobe arrives in pieces, not assembled, and the boards are carried up the stairs one at a time. Check the width of the turns, the height of the front door and whether there is a tight bend in the hallway.
If you live in El Mercat, Sant Francesc or any other part of Ciutat Vella, let us know about these details when you request the visit. That way the design avoids pieces that are too long for your staircase and we can plan when each module goes in. If your residents' association requires you to reserve the entrance hall or notify your neighbours, do so a few days ahead.
Send us a photo and the approximate measurements on WhatsApp and we'll give you some initial guidance.
In a small bedroom, the space taken up by an open door matters as much as the wardrobe itself. A hinged door needs a clear swing; if there is a bed or a chest of drawers in front, it may not have enough room. Sliding doors don't intrude into the room and keep the front clear.
If you prefer hinged doors for ease of access, each leaf can be made narrower so that it opens with less swing. During the visit we measure the real distance between the wardrobe wall and the nearest piece of furniture, and decide from there. For anyone living in La Seu or El Pilar with a long, narrow room, the best solution is sometimes a mix of both: sliding in the narrow stretch and hinged for the rest.
If your home in Ciutat Vella has a larger room, or a bedroom with an alcove, it is worth considering a made-to-measure walk-in wardrobe instead of a conventional wardrobe. An L-shaped or U-shaped walk-in wardrobe lays out long hanging rails, double rails, drawers and a shoe rack along one run, and you can see everything at a glance.
Before you decide, check that there will be a comfortable aisle between the two fronts, roughly the space needed to open a drawer and walk past sideways. With a free wall of around two metres, a small version is already possible. It is better to start with a simple layout and leave room to extend it later than to fill the whole room from day one.
You don't always need to start from scratch. If your wardrobe in La Xerea or El Carme has a sound structure and the problem is the inside, the layout can be redone with new shelves, rails and drawers. If it's the look that bothers you, renewed doors in a different colour or a wood finish will do.
Before you write to us, open the doors and photograph the inside with the light on. Note what's surplus and what's missing: long hanging clothes that don't fit, shelves that are too high, drawers that stick. With that information we can tell you whether it is worth renovating the wardrobe or whether it would be better to replace it with a new one, and explain the difference in work involved.

A useful first reply needs clear images. Take one photo facing the wall and another from the corner of the room, with the bedroom door visible. Note down the width, the height to the ceiling and the depth you can give over to the wardrobe.
Also mark where the sockets, radiator, light switch and window are, because they may mean leaving a gap or trimming a side panel. You don't need a carpenter's precision: the tape measure at home will do, and the visit will correct whatever needs correcting. Anyone writing from Sant Francesc or El Mercat with four photos and a list of items usually gets a much more precise proposal from the very first exchange.
The measuring visit takes place in your home. It costs €50 if you end up not ordering the wardrobe, and there is no charge if you go ahead. Once the measurements are taken, the final quote is drawn up and sent as a fixed price, and manufacturing usually takes two to three weeks from when the deposit is paid.
Beforehand, the configurator helps you organise your ideas, because it prepares a design and sends it to us, although it doesn't show prices. If you have questions about our method, see the how we work page. If your home is close to the border with another district of Valencia, you can also take a look at La Zaidía or El Pla del Real.
Quote
With your name, a phone number and a photo of the space, we can get started.
What happens next
Frequently asked questions
Yes. We work across Valencia, including La Seu, La Xerea, El Carme, El Pilar, El Mercat and Sant Francesc, as well as the rest of Valencia and its province. Give us your neighbourhood and the approximate street when you request the visit and we'll arrange a day and time.
Yes, it's one of the reasons we measure in the home. We take several width and height measurements and the wardrobe is built with plinths and side panels that absorb the irregularities of the wall.
The pieces are made with the way they will go in firmly in mind. Tell us the width of the turns and the entrance door when we arrange the visit, and the design will avoid modules that are too long to carry up by hand.
Yes. With the configurator you draw the wall, choose modules and doors, and send the design for us to look at. During the visit we check the measurements and correct whatever needs correcting.
It can, if there is room to open the doors or if you opt for sliding doors. During the visit we measure the free width of the passage and decide on a depth that still lets you move around comfortably.
Tell us which neighbourhood you live in and what you need to store. With a few photos and rough measurements, we'll prepare a first proposal and arrange the measuring visit.